Web
Analytics
Have any issue : +1-888-219-3540

Know How To Configure Netgear Router Setup with Simple Steps

Netgear has done something revolutionary in the field of networking devices. Therefore, I must say you have made the right choice. Netgear routers are most noteworthy because of its superb designing and amazing build quality. But setting up the router for the first time can be a headache. That’s why I have come up with all the necessary steps you need to learn about Netgear Router setup. Read my article and do the job like a pro.Netgear Router Setup

Netgear Router Setup for Cable Internet Connection

Want to configure your Netgear Router using Smart Wizard? Here are the steps for you.

  • Firstly, connect your modem to the internet port of your Netgear router, then connect your computer to one of the four LAN ports.Netgear Router Setup
  • Switch your computer, router, and modem off and on again. Leave them for few minutes to boot up.
  • Now, open a web browser and type the router’s IP address there in the address bar and press enter.
  • Here you will be prompted to log in to the router
  • Put your Username and Password

Default Username is ‘admin’ and the default Netgear router setup Password is ‘password’Can’t log in with the default username and password? Then you must have changed your router’s username password. Try to login with another username password you might have put. Not being able to log in yet? Get help from the experts. Talk to our support executives and they can help you do the job.

  • After successfully logging into your router’s web-based page Click on the Setup Wizard
  • As the Setup wizard screen displays Select Yes and Click Next

Netgear Router Setup Password

 

  • Here you will see that the Setup Wizard detects Dynamic IP, Click Next, and the router will save the settings.

Netgear Router Customer Care

 

  • Finally, check if you are connected to the internet. To do so select Router Status under the Maintenance section.

Netgear Router Setup with Netgear Genie:

  • Firstly, unplug the modem and router power cables. Do you have a backup battery on your modem? Then you must remove that too.
  • Then, connect an Ethernet cable from the modem to the Internet port of the router
  • Connect an Ethernet cable from the computer to any one of the LAN ports of the router (grey cable in the diagram)
  • Now, Re-insert the backup battery (if any) and reconnect the modem power. Wait for few moments until all lights to become stable
  • Then, reconnect the power of the router and wait for the power light to become solid green
  • Now, open a web browser and type the router’s IP address there in the address bar and press enter.
  • Here you will be prompted to log in to the router
  • Put your Username and Password

If you have not changed your router’s username password previously, here are the default login credentials for you:

Username: admin

Password: password

  • Now, Click on Advanced and go to the Setup Wizard
  • Select Yes and finally Click Next

The congratulations page will be displayed when the setup finishes configuring the internet connection.

Anyway, Folks! That’s all for now. Wrapping up I would like to say the best way you could configure your Netgear router is by taking help from the experts. Dial the toll-free number of Netgear Router Support and get your job done with an ease. For any queries with other Netgear products, then you can chat with our experts in Netgear online chat portal or you can drop your queries on mail.

Call Us Now