Support Number, Call us
The Netgear CM500 cable modem router is meant for delivering stable connectivity and high-speed internet with up to 680 Mbps speed. If you are looking to lower the cable bill, then this router should be your first choice.
But to get access to all its high-ending features you need to know the proper approach. We will assist you to complete the Netgear cm500 Setup procedure with our effective guide.
How to Setup Netgear CM500 Modem?
Well, before moving to the setup process you have to ensure that you fulfill the factors mentioned below. Note down the account number and phone number associated with the internet account. You will also need the email address or username and the password.
Now, go through the steps mentioned below to complete the Netgear CM500 Setup process.
Step 1- Use a Coaxial Cable
In the very beginning, you have to use the coaxial cable provided by the cable company. Connect the cable port on the modem router to a cable wall outlet. Ensure that the cable is tight and secured.
Step 2- Connect the Cable Modem to a Computer
Now, use the Ethernet port for connecting the Gigabit Ethernet port on the modem to the ethernet port of the computer. Once you have installed and activated the cable modem, you can disconnect the computer and connect the modem with a router.
Step 3- Connect the Power Adapter
You have to connect the power adapter to the cable modem. Furthermore, you should plug the power adapter into the electrical outlet. When you are done with the setup process, then, the power lights will flash green.
Step 4- Cable Modem will Become Online
Now, when the LED lights stop blinking as well as lights are solid green, then the cable modem comes online. Wait for a few minutes as this is a time-consuming procedure.
Note the response of the LED light, as follows:
- When the modem is looking for one or more downstream channels, then the LED lights will blink slowly.
- The LED blinks faster when the modem is looking for one or more upstream channels.
Step 5- Set up the Internet Service
Even you have a strong internet connection, though internet service is available only after you it set up with the CM 500.
Now, to activate the internet services, go to the cable internet provider’s website. Simply, follow the online instructions to activate the internet service.
Unfortunately, if you can’t activate the Internet services, then contact your cable internet provider. Request them to provide you the detailed information about your account and provide the cable modem’s model number.
Wait for the confirmation and check if the cable modem is visible to the cable internet provider. Finally, reboot the cable modem and check the online status.
These are most ways for Netgear cm500 Setup. You can also opt for a speed test to determine the actual internet speed. Now, if you have any queries regarding the process, then state that in the comment section. For more tech-based articles follow our website.